OKTC Staking Rewards Algorithm#


OKTC allows users to stake OKT and vote for one or more validators, thus allowing users to receive dividend rewards on the chain. This paper explains the principles and specific guidelines of dividend rewards obtained from staking OKT.

Example of an on-chain staking reward#

OKTC allows anyone that stakes a minimum of atleast 10,000 OKT the ability to operate a full node to become a registered validator. After every epoch cycle (252 blocks), OKTC will calculate the weight of every validator and the Top 21 weighted nodes will become the next epoch cycle’s block producers that participate in consensus, while the others become alternative nodes. Under Tendermint’s consensus algorithm, these 21 nodes will vote to produce the new block. Every validator that participates in the maintenance of the OKTC network receives a corresponding block reward.

The more vote shares a validator receives, the more weight that validator holds, therefore the bigger the reward that validator receives. In order to motivate users to vote for them, validators can set a favourable commission rate, and automatically distribute the rewards based on the ratio of voting shares. The values of commission rates range from [0,1], so if, for example, the commission rate is set to 0.6, that would mean that the validator receives 60% of the total reward, and the remaining 40% is distributed to the users based on the ratio of their voting shares.

Note: After registering as a new validator, the commission rate is defaulted at 1. The validator can set their preferred rate by initiating a transaction; for a more detailed explanation, refer to OKTC CLI staking manual.

Using the following website's data as an example, imagine a user holds 1000 OKT and voted for 15 different validator nodes; now imagine this user has a commission rate set at 0.6; the staking dividend reward would look like this:

  • The user would receive a staking reward from each of the 15 validators voted for; for example, Chillcrypto would provide an estimated annual reward of 13.0986997 OKT with a 1.31% APR; Unicorn would provide an estimated annual reward of 13.1002434 OKT with a 1.31% APR.

  • Because the user voted for 15 different validator nodes, the total staking reward would be a sum of the total of all 15 nodes' estimated annual rewards, which is 196.4920921 OKT with a 19.64% APR.

namesharescommissionRatedepositOKTNums (OKT)depositOKTRewardPerYear (OKT)APRtop21
Unique farming418972000000000.6100013.09880531.31%True
ZK capitial418870000000000.6100013.0996131.31%True
Nebulas NOVA55296700000000.6003.47%True
ChainUP Labs55252000000000.6003.48%True

Rules of on-chain staking rewards#

Role definition#

NameDefinitionElection ConditionQuantity
CandidateUsers who have registered Validator on the chainUnlimited
ValidatorExercise the right to generate blocks and enjoy the right of on-chain governanceTop 21 nodes with the highest number of okt delegations to be the validators in the next cycle21
UserA user holding oktHold oktUnlimited
DelegatorA user who can enjoy the reward from the validatorVote on a node which will become a validator after the next electionUnlimited
ProposerPack transactions and notify other validators for verificationGenerate a sequential list of proposers based on the number of pledged okt and voting okt of each validator and each validators may become a proposerOnly one each time

Source of staking rewards#

OKTCs staking rewards come from block rewards and transaction fees. OKTs issuing mechanism is similar to that of BTC, which takes a fixed total amount and periodically reduces tokens. OKT has a total of 21M OKT in circulation, including 10M OKT allocated by Genesis Mining; each new block corresponds to a 0.125 OKT reward from 2023-3-18 15:45(0.5 OKT reward before), and the reward is halved every 9 months.

Deflation DateBlock RewardBlocksVolume
2023-3-18 15:450.1256228477778559
2023-12-17 14:150.06256228477389279
2024-09-16 12:450.031256228477194639
2025-06-17 11:150.015625622847797319
2026-03-18 09:450.0078125622847748659
2026-12-17 08:160.00390625622847724329
2027-09-17 06:460.001953125622847712164
2028-06-17 05:160.00097656362284776082

Below is a specific explanation of the distribution rules for block rewarding:

  • X% represents the community distribution rate (currently at 0%). Y% represents the commission rate of every validator node (defaulted at 100%). After the update goes live, validators can adjust this according to their own needs. More info on commission rate values can be viewed through CLI commands or on https://www.okx.com/explorer/oktc/bp-list.

  • Block rewards = block producers reward + total amount of all block’s transaction fees

  • In one epoch cycle:

    • (1-x%) of block reward * 25% averaged and distributed to 21 producer nodes (validators)
    • (1-x%) of block reward * 75% of vote shares distributed to 21 producer nodes (validators) and candidate nodes (candidate validator)
    • X% of block reward + surplus of distributed balance (mentioned above), then all poured into the community fund pool
  • As a reward to users, the validator node will distribute (1-y%) of their earnings to users according to the proportions of user's votes.


Voting Weight Calculation#

The voting weight is multiplication result of voting OKT and fixed weight(11700000).

Note: 11700000 is the weight of 1 okt, calculated by calculateWeight before venus6 (nowTime=2023-06-01 00:00:00 GMT+0). After v1.7.2, OKTC adopts fixed weight calculation, and the original voting decay mechanism will be discarded and no longer used.

Taking OKT voting as an example, the weight as follows:


Exchange and multiple voting#

After staking OKT (minimum of 0.0001 OKT per stake), users can opt to exchange their voting rights for the validator node. It’s worth mentioning that OKTC uses a multi-voting system, where users can vote for up to 30 validator nodes after completing their stakes (each node can only be voted for once). Furthermore, when users want to stake OKT again, they will not need to go through the voting process again, but will vote for their previous validator node by default.

Staking rewards calculator#


PeriodIf the voting shares of a validator node within N blocks does not change, then these N blocks are defined as a period. Whenever the validator node’s share of votes changes, a new epoch is automatically recorded.Each epoch has a starting block and an ending block.
Validator's current rewardsRecord of the amount awarded during the current period.
Validator's historical rewardsWhenever the number of votes of the validator node changes, a new historical reward period is stored and recorded, used to help users calculate their earnings.
Reward ratioIn a specific period, the reward ratio can be calculated due to fixed share of votes: reward ratio = total rewards/total shares
Cumulative reward ratioSum of reward ratio accumulated over previous epochs

Since the voting shares of the validator on the chain will not experience constant fluctuation, hence the period concept was put in place to calculate rewards.

  • The validator node’s voting shares will not change during a period.

  • Only when a user’s actions cause the validator node’s voting shares to change will that current period end, and a new period begin.

  • With the period concept, calculating the user’s earnings only requires determining the sum of earnings the user accumulated during the user’s start and end period.

The rationale for calculating user earnings is to track a single share over consecutive periods, in other words, the Cumulative Reward Ratio. According to users, if their shares don’t change within these periods, they can calculate their reward earnings: user earnings = Cumulative Reward Ratio * Shares

Below is delegator A's process of staking, voting, revoking stake and explanation of rewards.

Historical period m-4Historical period m-3Historical period m-2Historical period m-1
Current period's reward10 OKT10 OKT10 OKT
Delegator A's votes50 shares50 shares0shares
Validator node's total votes100 shares500 shares450 shares
Reward ratio0.1 OKT0.02 OKT0.0222 OKT
Cumulative reward ratio0 OKT0.1 OKT0.12 OKT0.2422 OKT
  • Delegator A votes at the end of m-4 period, resulting in the start of m-3 period.

  • Delegator B votes at the end of m-3 period, resulting in the start of m-2 period.

  • Delegator A votes at the end of m-2 period, resulting in the start of m-1 period.

  • Delegator A revokes vote, activates reward, total reward is the sum of earnings accumulated between m-4 and m-2.

​ (0.12OKT - 0 OKT) * 50 shares = 6 OKT

  • Delegator B revokes vote, activates reward, total reward is the sum of earnings accumulated between m-3 and m-1.

​ (0.1422 OKT - 0.1 OKT) * 400 shares = 16.88 OKT

Withdrawing rewards#

Users who have accumulated a certain amount of earnings can claim their earnings into their wallets in two ways: active withdrawal and passive withdrawal.

  • Active withdrawal: the user initiates an on-chain claim transaction, receiving rewards from a single validator node.

  • Passive withdrawal: after the user has voted and attempts to stake or vote again, a change in number of votes triggers withdrawal of rewards (only the user's own actions can trigger this).

Put briefly, active withdrawal is when the user actively conducts the withdrawal transaction themselves, while passive withdrawal conversely means that the user conducts an action not related to withdrawing, for example staking or voting, that triggers a change to the validator and triggers an automatic withdrawal.

However, due to a truncation precision issue with claiming rewards-if the reward amount contains decimals-the user will receive the amount up to the 4 place (0.0001), while everything from the 5 place (0.00001..) and on will be distributed to the community pool. For example, if the user has 1.55211 OKT from V_1 node, 0.39211 OKT from V_2 node and 24.30345 OKT from V_3 node, the amount claimed and distributed to the community pool would look like this:

  • Amount claimed by user: 1.5521 + 0.3921 + 24.3034 = 26.2476 OKT

  • Amount distributed to pool: 0.00001 + 0.00001 + 0.00005 = 0.00007 OKT

Truncation precision can be adjusted through community proposal governance. The current truncation precision setting can be viewed on the command line.

exchaincli query distr params

Unstaking OKT and locking cycles#

Users can initate an OKT retrieval (unstake) application through the command line. Unstaking requires a 14 day token locking period. During this time, locked OKT will not receive staking rewards, and users cannot conduct any other actions. If users apply for OKT retrieval multiple times during the 14 day lock period, all applications will be converged into one, and the lockdown period countdown will reset starting from the most recent application.

The minimum amount of OKT required for every unstake: 0.0001 OKT.